Where to display Slimpyx ?

Thanks to the Slimpyx double-sided glue-dots, the frame can be put up on all kind of surfaces : painted walls, unwaxed furniture, glass, tiling, metal, plastics...

- Surfaces must be quite clean, dry, grease-free, solid and hard.

- Before setting up, please clean walls with a simple washing up liquid.

- Bumpy or rough surfaces reduce the glue dots' efficiency.

In some cases, adding more glue dots may be necessary.

Pay great attention to delicate surfaces such as fragile wall paper, and test before hand, unsticking glue-dots in an invisible place.

For cleaning, please use a soft cloth.

Instructions :

How to install Slimpyx ?

1/ Each adhesive dot must be stuck half onto the frame and half onto the picture.

2/ Pull the tabs(a) to uncover the glue dots(b).

3/ Stick the frame on the wall. Press firmly, that’s it !

How to remove your Slimpyx ?

1/ Delicately unstick the frame from the wall by pulling one corner of the frame at a time, very slowly, without tearing the adhesive, which will gently stretch. On most surfaces the photo (or picture) will stay on the wall.

2/ Next, gently pull off the adhesive without tearing it. Don't use your nails but rather gently pull on it laterally, the adhesive dot will stretch as it comes off the photo and off the wall without damaging either of them. Dots come off cleanly, with no greasy stains and no sticky residue.